EPLANT-Piping V 2023.0 - Evaluation Version Limitations

LIMITATIONS OF GRAPHIC MODULE

The Evaluation Version of the EPLANT-Piping module imposes some limitations on the Graphic Module only, because Data Base module does not need a license to run.
The Graphic Module has the following general limitations:

• Piping Lines: only one new line can be created in each 3D model, with a fixed name equal to 8"-H-600-001-A1.
• Diameters: only two diameters are available for selection 6" and 8".
• 3D Components Generation: any component type can be created, with the limitation of being on the 8"-H-600-001-A1 line and having one of the two allowed diameters (6" or 8").
• 3D Typical Assemblies: they cannot be generated.
• Equipments: only one equipment can be created within a 3D model, which can be of any type, but with a fixed name TK-001.
• Equipment Nozzles: nozzles can be created only for the TK-001 equipment, with 6" and 8" diameters only.

DISABLED COMMANDS

- Report to DB
- Equipment Nozzle change
- Equipment Name change
- Equipment Copy/Move/Rotate
- Equipment Format Conversion
- Piping Class Verification
- Piping Lines Verification
- Line Modification/Line Copy/Line Delete
- Isometric symbol definition and testing
- Connection Point Modification
- MTO in 3D Models and Plan Extractions
- Insulation modification
- Joint Codes generation
- Schedule by Phases and dates
- 3D Models Inclusion
- Solid-Surface 3D primitives change
- New/Existing Conversion
- Line/Equipment Definitions Delete
- External Registered Applications Purge
- Equipment and Line Definition Purge
- Equipment and Line Status
- Export to NavisWorks
- Export to PDMS
- Export Lines to PCF Format
- Export 3D Models to Solids
- 3D Insulation Generation

ENABLED COMMANDS FOR 8"-H-600-001-A1 LINE ONLY

- Definition of a New Line
- Line Routing
- Piping Component Generation
- Line Active Parameters Modification
- Piping Isometric extraction
- View extraction
- Spool and Joint Code definition
- Components Move
- Manual Notes in 3D models and isometrics
- Rotate isometric symbols/dimension and notes
- Automatic dimensioning executed from an isometric drawing
- MTO executed from an isometric drawing
- Move Tag and Notes in isometric and plan drawing
- Reconstruction command in isometric drawing
- Automatic Annotation executed from an isometric drawing
- Manual Annotation executed from an isometric drawing
- Insert 3D Typical Assembly
- Pipe Automatic Placement
- Automatic Placement of Elbows, Flanges and Pipes

ENABLED COMMANDS FOR TK-001 EQUIPMENT ONLY

- New equipment
- New nozzle
- Nozzle Rotate
- Add elements to equipment
- Equipment delete
- 2D Plan Extraction

SCOPE OF THE EVALUATION VERSION

The scope is to allow to evaluate the product operating with it inside the AutoCAD environment and simulate in this way its use in a real project. It has not any limitations to work with real size projects already done with EPLANT-Piping (except those stated above), to allow showing its features in a real environment.

It is forbidden to use this Evaluation Version in any real project, unless for data query, as stated in the License Agreement.

Last updated August 02, 2023.