The table format is the following:
|
FIELD |
DESCRIPTION |
|
ICLA |
Insulation Class, any name up to six characters long. Identifies the insulation type. |
|
DIAM |
Nominal Piping Diameter. No ranges admitted, only specific values. |
|
I_TH |
Insulation thickness corresponding to that diameter. Up to six characters long. |
|
I_MM |
Insulation thickness in mm. Used for interference checking only. |
|
MAT_INS |
Contains the Material Code associated to the insulation. |
|
CODA_INS |
Contains the Additional Code associated to the insulation. |
|
LINING |
Lining Code. If it is equal to 1, Insulation Lining will be generated with the same quantity as the insulation. |
|
MAT_LIN |
Contains the Material Code associated to the Insulation Lining. |
|
CODA_LIN |
Contains the Additional Code associated to the Insulation Lining. |
The insulation class is assigned to each component at the moment of its creation. It can be modified later also.
Last Updated April 16, 2015.